www.rfm.com e-mail: info@rfm.com page 1 of 5 ?2010 by rf monolithics, inc. PX1004-1 - 7/6/10 electrical characteristics characteristic sym notes min typ max units nominal center frequency f c 1 82.20 mhz passband insertion loss at fc il 3.0 5.5 db 3 db passband bw 3 1, 2 25 42 khz amplitude ripple over fc 15 khz 1.0 db p-p group delay variation over fc 17 khz gdv 6.0 s p-p third-order intermod. for -20 dbm tones at fc 100 & 200 khz -95 dbm rejection fc 100 khz 1, 2, 3 11 16 db fc -1500 khz to fc -1600 khz 65 ultimate 65 operating temperature range t a 1-20 +70 c impedance matching to 50 ? unbalanced external l-c case style sm13365-12 13.3 x 6.5 mm nominal footprint lid symbolization (yy=year, ww=week) see note 4 rfm PX1004-1 yyww sm13365-12 ? low insertion loss excellent selectivity hermetic 13.3 x 6.5 mm surface-mount case single-ended input and output complies with directive 2002/95/ec (rohs) absolute maximum ratings rating value units maximum incident power in passband +10 dbm maximum dc voltage between any 2 terminals 30 vdc storage temperature range -40 to +85 c suitable for lead-free soldering - maximum soldering profile 260c for 30 s 82.2 mhz saw filter PX1004-1 1. unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified demonstration board with impedance matching to 50 ? and measured with 50 ? network analyzer. 2. unless noted otherwise, all frequency specifications are referenced to the nom- inal center frequency, fc. 3. rejection is measured as attenuation below the minimum il point in the pass- band. rejection in final user application is dependent on pcb layout and exter- nal impedance matching design. see application note no. 42 for details. 4. "lrip" or "l" after the part number indicates "low rate initial production" and "eng" or "e" indicates "engineering prototypes." 5. the design, manufacturing process, and specifications of this filter are subject to change. 6. either port 1 or port 2 may be used for either input or output in the design. however, impedances and impedance matching may vary between port 1 and port 2, so that the filter must always be installed in one direction per the circuit design. 7. us and international patents may apply. 8. rfm, stylized rfm logo, and rf monolithics, inc. are registered trademarks of rf monolithics, inc. 9. electrostatic sensitive device. observe precautions for handling. notes: connection terminals port 1hot 2 port 1 gnd return 3 port 2 hot 8 port 2 gnd return 9 case ground all others electrical connections pb
82.2 mhz saw filter www.rfm.com e-mail: info@rfm.com page 2 of 5 ?2010 by rf monolithics, inc. PX1004-1 - 7/6/10 ch1 s2 1 l og 10 db/ ref -4.46 1 db cent r 82 . 200 mhz span . 500 m hz c ch2 s21 log 10 db/ ref -4.655 db cen ter 82 . 200 000 mh z span 4 . 000 000 mhz cor ch3 s21 del 1 us/ ref 12.14 us centr 82 . 200 mh z span . 500 mhz c smo 12 may 2010 08:54:27 1 2 3 4 1 : 0 . 0000 db 0 . 000 000 m hz ma x ref=1 ch1 marker s bw : . 077195 mhz cent : 82 . 195848 mhz q: 1064 . 8 1_ loss : -4 . 4410 db 1 2 3 4 5 1 : 0 . 0000 db 0 . 000 000 m hz ref= 1 ch 2 mar kers 2:-73 . 756 db -1 . 50000 mhz 3:-67 . 039 db -1 . 60000 mhz 4:-28 . 942 db -100 . 000 khz 5:-33 . 889 db 100 . 000 khz 1 2 3 3 : 1. 0290 us . 034 000 mhz ref= 2 ch 3 mar kers mean : 10 . 307 us s . dev : 533 . 58 ns p-p : 1. 9680 us px1004- 1 v2bw+5khz 1100 0a ful l ful l amplitude and group delay plots
82.2 mhz saw filter www.rfm.com e-mail: info@rfm.com page 3 of 5 ?2010 by rf monolithics, inc. PX1004-1 - 7/6/10 ch1 s11 1 u fs centr 82 . 200 mhz span . 250 mh z c ch2 s21 log 1 db/ ref -4.44 db center 82 . 200 000 mhz span . 250 000 mhz c ch3 s22 1 u fs cent r 82 . 200 mhz span . 250 mhz c 12 may 2010 08:56:53 1 1 : 21 . 953 -915 . 04 m 2 . 1160 nf 82 . 200 000 mhz 1 2 3 3 : - . 20880 db . 030 000 mhz ref =2 ch2 markers mean : -4 . 6026 db s . dev : . 05030 db p -p : . 20880 db 1 1: 25 . 554 -12 . 505 154 . 83 pf 82 . 200 000 mhz PX1004-1 v2bw+5khz 11000a ful l ful l PX1004-1 2.0 pf 470 nh 470 nh 2.7 pf input ou tput input/output impedance and passband amplitude plots filter test circuit 2 8
82.2 mhz saw filter www.rfm.com e-mail: info@rfm.com page 4 of 5 ?2010 by rf monolithics, inc. PX1004-1 - 7/6/10 case dimensions dimension mm inches min nom max min nom max a 13.08 13.31 13.60 0.515 0.524 0.535 b 6.27 6.50 6.80 0.247 0.256 0.268 c 1.91 2.00 0.075 0.079 d 1.50 0.059 e 0.79 0.031 h 1.0 0.039 p 2.54 0.100 sm13365-12 ceramic 12-terminal surface-mount case 13.3 x 6.5 mm nominal footprint materials solder pad plating 0.3 to 1.0 m gold over 1.27 to 8.89 m nickel lid plating 2.0 to 3.0 m nickel body al 2 o 3 ceramic pb free electrical connections connection terminals port 1 input 2 return 3 port 2 output 8 return 9 ground all others single-ended operation return is ground c h p (8 places) e (10 places) d b a 4 5 6 7 1 12 11 10 3 9 8 2 t op view b ottom view 2 3 8 9 1 12 11 10 4 5 6 7
82.2 mhz saw filter www.rfm.com e-mail: info@rfm.com page 5 of 5 ?2010 by rf monolithics, inc. PX1004-1 - 7/6/10 tape and reel specifications quantity per reel 1000 user direction of feed component orientation and dimensions carrier tape dimensions ao 7.0 mm bo 13.8 mm ko 2.0 mm pitch 12.0 mm w 24.0 mm pin #1 see detail "a" 1 3 . 0 2 0 . 2 2.0 12.0 1 0 0 r e f . " b " r e f . 21.0 254 24.4
|
